Hardware overview (IFP52-2F)

Welcome to your ViewBoard IFP52-2F Android EDLA (Enterprise Device Licensing Agreement) certified device. This interactive flat panel (IFP) device is touch enabled and allows you to create and present digital content for the classroom.

This article introduces the basics of the IFP52-2F's hardware, as well as gives an overview of the display's ports and general uses.

What makes this device Android EDLA certified?

Google now provides a partner program with Android EDLA (Enterprise Device Licensing Agreement) certification for large panel displays. As an EDLA certified device, the IFP52-2F has Google Mobile Services, or GMS, built-in. Altogether, this means all Google's most popular apps and services are supported right on the device.

Access Google Drive, Chrome, Docs, and more with all your files and settings configured after signing in to your device with your Google account. Additionally, open the safe and secure Google Play Store to browse all your preferred apps. View the Kids page where popular teacher-approved apps can be found. Rest assured that all apps downloaded to your system are safe and secure by checking Play Protect in your settings.

Learn more about Android EDLA certification.

Equipment basics

The following items are included in your IFP52-2F's packaging:

What comes with your IFP52-2

  • Power cord (3m)
  • HDMI cable (3m)
  • Remote control
  • AAA batteries
  • Screws (8x)
  • Clamps (5x)
  • RS-232 adapter
  • Camera plate
  • Stylus pens (2x)
  • USB touch cable (3m)
  • Quick Start Guide
  • Compliance Statement
Delete

Wall mount kit specifications (VESA specs)

These wall mounting specifications are for your IFP52-2F. For specific wall mount or mobile mount bracket installation steps, please review your IFP52-2F's Quick Start Guide wall mount installation guide. If attaching to other building materials, please contact your local field support team.

6552-2

Rear panel with VESA spec measurements highlighted. Refer to the table below for corresponding measurements.

Delete

7552-2

Rear panel with VESA spec measurements highlighted. Refer to the table below for corresponding measurements.

Delete

8652-2

Rear panel with VESA spec measurements highlighted. Refer to the table below for corresponding measurements.

Delete

Model

VESA Spec.
(A x B)

Standard Screw 
(C x D)

Quantity

IFP6552-2F 500 x 400 mm M8 x 25 mm 4
IFP7552-2F 600 x 400 mm M8 x 25 mm 4
IFP8652-2F 800 x 600 mm M8 x 25 mm 4
Delete

WARNING

Do not use screws that are longer than the standard dimension listed above. Using alternative screws may cause damage to the inside of the panel.

IFP52-2F controls and ports overview

This section breaks down the details of different input/out (I/O) ports and controls located on the IFP52-2F.

Front panel of the IFP52-2 with input/output (I/O) ports and control panel areas highlighted.

6552-2F

Rear panel.

Delete

7552-2F

Rear panel.

Delete

8652-2F

Rear panel.

Delete

Control panel

The control panel and front input/output (I/O), found on the bottom-right corner of the front of the IFP33, contain basic commands for the device and USB ports.

Refer to the table below for function details.


Button/Port

Function

1 Power indicator
  • Press to turn the device ON.
  • Press again to turn display backlight OFF/ON.
  • Press and hold to turn the device OFF.
2 Remote control receiver Receives commands from the device's remote control.
3 Ambient Light Sensor Monitors a room's ambient light.
4 USB Type-C USB Type-C input; connect to a PC with a USB Type-C output.
5 HDMI 1
  • High-definition input.
  • Connect to a PC (or other device) with an HDMI output.
6 TOUCH 1
  • Touch signal output to an external PC.
  • Pairs with HDMI 1.
7 USB Type-A
  • USB Type-A port.
  • Connect USB devices such as hard disks, keyboard, mouse, etc.

Input/output panels

Your IFP52-2F comes with multiple input/output (I/O) panels. The ports on these panels provide different ways to connect external devices by cable.

Overview of I/O panels located on different parts of the device.


Port

Function

1 RS-232 Serial interface; used for mutual transfer of data between devices.
2 LAN
  • Standard RJ45 (10M/100M/1G) Internet connection interface.
  • For ViewBoard and slot-in PC input sources.
3 USB Type-A Connect USB devices such as a hard disk, keyboard, mouse, etc.
4 TOUCH 2
  • Touch signal output to an external PC.
  • Pairs with HDMI 2/3 or VGA.
5 HDMI 2/3
  • High-definition input.
  • Connect to a PC (or other device) with an HDMI output.
6 HDMI OUT Connect to devices to display content from your IFP33 to it.
7 SPDIF For transmitting digital audio signals.
8 AUDIO OUT Audio to an external speaker or sound system.
9 AUDIO IN External computer audio input.
10 VGA External computer video input.
11 Power switch Turn AC power supply ON/OFF.
12 AC IN AC power input.

Knowledge Base

Need additional help?

Check our other resources — we'll be happy to assist you.