Hardware overview (IFP52)
Welcome to ViewBoard and your newly acquired interactive flat panel (IFP). Your ViewBoard IFP52 series comes with various components to assist in connecting devices and enhance your usage of the ViewBoard.
This article introduces the basics of the IFP52's additional hardware, as well as give an overview of the display's control panel and ports.
The following items are included in your IFP52's packaging:
What comes with your ViewBoard
|Pen stylus (2x)||Eraser||Remote control||AAA batteries (2x)||RS-232 adapter|
|Power cord||HDMI cable (10ft/3m)||USB Type-C cable (5ft/1.5m)||USB cable for touch (10ft/3m)||Clamp (5x)|
(4x: M4 x 7mm 2x; M3 x 7mm 2x)
Wall mount screws
(4x: M8 x 20mm 4x)
|Quick start guide||Compliance statement|
Wall mount kit specifications (VESA specs)
The following are some specifications for wall mounting an IFP52. For specific wall mount or mobile mount bracket installation steps, please review your IFP52's Quick Start Guide wall mount installation guide. If attaching to other building materials, please contact your nearest dealer.
VESA Spec. (A x B)
Standard Screw (C x D)
|IFP6552||600 x 400 mm||M8 x 20 mm||4|
|IFP7552||800 x 400 mm||M8 x 20 mm||4|
|IFP8652||800 x 600 mm||M8 x 20 mm||4|
IFP52 controls and ports overview
This section breaks down the details of different input/out (I/O) ports and controls located on the IFP52.
The control panel, found on the bottom-right corner of the front of the IFP52, contains basic commands for the device.
|1||Ambient Light Sensor: Monitor a room's ambient light.|
|2||Remote control receiver: Receives commands from the device's remote control.|
Power indicator light:
|4||Home: Return to the ViewBoard's home screen.|
|5||Return: Return to the ViewBoard's previous screen.|
|6||Touch lock: Disable/enable touch interaction.|
|7||Freeze: Lock the current image on the screen.|
Your IFP52 comes with multiple input/output (I/O) panels. The ports on these panels provide different ways to connect external devices by wire.
|1||USB 3.0||Connect USB devices such as a hard drive disk, keyboard, mouse, etc. Automatically switches between PC and ViewBoard input sources.|
|2||USB 2.0||Connect USB devices such as a hard disk, keyboard, mouse, etc. (5V dc/0.5A)|
|4||DisplayPort IN||DisplayPort input for connecting to a PC with DisplayPort output.|
|5||HDMI 1/2||High-definition input; connect to a PC (or other device) with an HDMI output.|
|6||HDMI||High-definition input; connect to a PC (or other device) with an HDMI output.|
|7||USB Type-C||USB Type-C input; connect to a PC with a USB Type-C output.|
|8||HDMI OUT||Connect to devices with an HDMI input function. Supports 1080p and 4K@60Hz.|
|9||LAN||Standard RJ45 (10M/100M/1000M) Internet connection interface. This network port is used for the ViewBoard, Type-C, and slot-in PC input sources.|
|10||SPDIF||Multi-channel sound via optical signals.|
|11||VGA||External computer video input.|
|12||AUDIO IN||External computer audio input.|
|13||EARPHONE||Audio output to an external speaker/headset.|
|14||RS-232||Serial interface; used for mutual transfer of data between devices.|